Program information is subject to change.

All times are listed in Pacific Time

 

Monday, May 6 

(all times are listed in Pacific Time)

 

Time

Description

 

7:30 a.m. - 4 p.m. PT

IEST Connect Networking Lounge and Registration Check in  
8 a.m. - 12 p.m. PT Working Groups (in-person only)
    WG-CC018: Cleanroom Housekeeping — Operating and Monitoring Procedures
 

9 a.m. - 4:30 p.m. PT

Training Courses
     (CC) The Foundations of Contamination Control using Essential Cleanroom Standards ISO 14644-1 and ISO 14644-2
     (DTE/PR) Design for Reliablity

 

 

9 a.m. - 1 p.m. PT

IEST Executive Board Meeting (by invitation only)

 
1:15 - 3:05 p.m. PT Working Groups (in-person only)
     WG-DTE047: Design and Use of Shock and Vibration Test Fixtures

 
 
1:15 - 3:05 p.m. PT

Conference Sessions (in-person only)
     (CC) Molecular AMC/SMC
     (DTE/PR) Design for Environmental Conditions: A Holistic Approach

 
 
1:15 - 5:15 p.m. PT Working Groups (in-person only)
     WG-CC054: Evaluating Mops Used in Cleanrooms and Other Controlled Environments
 
3:25 - 5:15 p.m. PT Conference Sessions (in-person only)
     (CC) Comprehensive Strategies for Sterile Compounding of Hazardous Drugs: Garbing, Decontamination, and Residue Management
     (DTE/PR) Unveiling Insights Through Dynamic Testing and Analysis
 

5:30 - 6:30 p.m. PT

ESTECH After Hours Networking (in-person only)

 
 

 

 

Tuesday, May 7 

(all times are listed in Pacific Time)

 

Time

Description

 

7:30 a.m. - 5 p.m. PT
 
IEST Connect Networking Lounge and Registration Check in  

8 - 9 a.m. PT

Networking Event - IEST Connections: Exploring Resources and Expanding Your Network (in-person only) 

 

9 a.m. - 4:30 p.m. PT

Training Courses
     (CC) Fundamentals of Contamination Control and Cleanroom Cleaning
     (DTE/PR) Reliability Data Analysis

 
 

9:30 - 11:20 a.m. PT

Conference Sessions (in-person only)
     (CC) Special Topics in Contamination Control
     (DTE/PR) Beyond the Norm: Non-Standard Measurement Techniques in Environmental Testing

 
 
9:30 - 11:20 a.m. PT Working Goups (in-person only)
     WG-PR001: Management and Technical Guidelines for the ESS Process
     WG-CC005: Gloves and Finger Cots Used in Cleanrooms and Other Controlled Environments
 
11:30 a.m. - 12:45 p.m. PT Working Group Chairs Meeting  

1 - 2:50 p.m. PT

Conference Sessions (in-person only)
     (CC) The Future of Contamination Control
     (DTE/PR) Real Life Fixturing Challenges and Principles

 
 
1 - 2:50 p.m. PT

Working Groups (in-person only)
     WG-DTE048: Climatics Testing Safety Hazards and Mitigations
     WG-CC051: Airborne-based Particle Measurement Methodologies

 
3:10 - 5 p.m. PT Conference Sessions (in-person only)
     (CC) Cleanroom Particle Classification, Monitoring, and Sampling Techniques
     (DTE/PR) Vibration and Shock Test Fixture Design and Evaluation Panel Discussion

 
 
3:10 - 5 p.m. PT

Working Groups (in-person only)
    WG-CC048: Guidance for Design, Performance, and Operations of Controlled Environments per USP 797
    WG-DTE026: Gunfire

 
5 - 6:30 p.m. PT Networking Event - President's Welcome Reception and Exhibitor Spotlight Presentations in the Expo Hall (in-person only)
 
 

 

 

Wednesday, May 8 

(all times are listed in Pacific Time)

 

Time

Description

 

7 a.m. - 4 p.m. PT

IEST Connect Networking Lounge and Registration Check in

 

7 - 8 a.m. PT

Breakfast with the Exhibitors (in-person only)

 
8 - 9:50 a.m. PT Networking and Coffee in the Expo Hall (in-person only)  
8 - 9:50 a.m. PT Conference Sessions (in-person only)
     (CC) Demystifying GMP Annex 1: Best Practices and Regulatory Updates
     (DTE/PR) Platform Specific Testing: A Panel Discussion

 
 
8 - 9:50 a.m. PT

Working Group Meetings (in-person only)
     WG-DTE009: Vibration Shaker System Selection

 

8:30 a.m. - 5 p.m. PT

Training Courses
     (DTE/PR) Physics of Failure

 
 
8:30 a.m. - 12 p.m. PT Training Courses
     (CC) Robotics and Automation in Cleanrooms and Other Controlled Environments
 
10:10 a.m. - 12 p.m. PT Conference Sessions (in-person only)
     (CC) Taming the Mold: Fungal Spore Contamination Control in Cleanrooms
     (DTE/PR) Beyond Earth: Environmental Testing for Space Applications

 
 
10:10 a.m. - 12 p.m. PT Working Group Meetings (in-person only)
     WG-DTE043: MIL-STD-810
     WG-CC012: Considerations in Cleanroom Design
 
12:15 - 1:30 p.m. PT Awards Luncheon and Keynote Speaker (in-person only)  

1:30 - 3 p.m. PT

Mix and Mingle: Networking & Dessert in the Expo Hall and Exhibitor Spotlight Presentations (in-person only)

 
2 - 5 p.m. PT Training Courses
     (CC) Developing a Holistic Disinfectant Validation and Efficacy Testing Program
 

3 - 4:50 p.m. PT

Conference Sessions (in-person only)
     (CC) Design and Energy Conservation for Advanced Facilities and Cleanrooms
     (DTE/PR) Mastering Climatics Testing and Analysis: Uncovering Environmental Insights

 
 
3 - 4:50 p.m. PT Working Group Meetings (in-person only)
     WG-DTE001: Role of the Engineering Specialist
     WG-CC901: IEST-STD-1246: Product Cleanliness Levels and Contamination Control Program
 
5:30 - 6:30 p.m. PT ESTECH After Hours Networking (in-person only)  

 

 

Thursday, May 9

(all times are listed in Pacific Time)

 

Time

Description

 

7:30 a.m. - 12 p.m. PT

IEST Connect Networking Lounge and Registration Check in

 
8 - 9:50 a.m. PT

Conference Sessions (in-person only)
     (CC) Navigating Emerging Markets in Contamination Control
     (DTE/PR) Building Success from the Group Up: Strategies for Qualification Test Program Development

 
8 - 9:50 a.m. PT
 
Working Group Meetings (in-person only)
     WG-CC003: Garment System Considerations for Cleanrooms and Other Controlled Environments

 
 
9 a.m. - 4:30 p.m. PT
 

Training Courses
     (CC) New GMP Annex1 Revision, Contamination Control Strategy and Beyond
     (DTE/PR) Accelerated Life Testing and ESS Design

 

10:10 a.m. - 12:00 p.m. PT

Conference Sessions (in-person only)
     (CC) Panel Discussion: Portable Cleanrooms, Modular Cleanrooms, and Design-Build Cleanrooms
     (DTE/PR) Navigating the Path to Reliable Products: Qualification Test Program Development Panel Discussion